One assessment for the stack and covering
The leak route checked
We inspect masonry, flashing and nearby coverings instead of guessing the cause.
Repairs work together
We coordinate chimney work with the roof details that meet the stack.
Loose areas identified
We look for tired pointing, damaged pots and unstable visible masonry.
Stop chimney defects feeding water into the roof
Chimneys stand above the covering and take the weather from every side. Pointing can wash out, masonry can crack and flashing can lift or split. Water then reaches the stack-to-roof junction and may travel into nearby timbers or ceilings. We inspect the visible masonry, pots, caps and leadwork together with the surrounding slate or tile. This joined-up view matters because a damp patch beside the chimney may come from the stack, the flashing or a damaged covering close by. Repairing only one part can leave the actual route open.
Repair the stack and weatherproof junction together
The right repair depends on what has failed. We can plan repointing, local masonry work and renewal of defective flashing or adjoining coverings where appropriate. Sound sections are kept where practical, while loose or weathered areas are dealt with before they cause more damage. Neatly formed lead needs secure joints and a clear path for rain away from the stack. By coordinating the chimney and roof work, we avoid one repair disturbing another and leave the junction functioning as a complete detail.
Frequently asked questions
How can I tell if my chimney flashing is leaking?
Damp near the chimney breast can point to failed flashing, but water may also enter through masonry, pots or nearby coverings. We inspect the complete junction to find the likely route before defining a repair.
Can you repoint a chimney without replacing the roof?
Yes, if the roof covering remains serviceable and the defect is confined to the chimney. We still check the flashing and adjacent slates or tiles, as those details may need local work to keep the junction watertight.
Do damaged chimney pots always need replacement?
Not every pot problem means complete replacement, but cracked, loose or unstable parts need proper assessment. We look at the pot, cap and supporting masonry, then explain the repair needed for the visible condition.